Aluminium Die Casting Parts for Aluminum Die Casting LED Street Light Housing

Advantages and disadvantages:

• Excellent dimensional accuracy (dependent on casting material, but typically 0.1 mm for the first 2.5 cm (0.004 inch for the first inch) and 0.02 mm for each additional centimeter (0.002 inch for each additional inch).
• Smooth cast surfaces (Ra 1-2.5 micrometres or 0.04-0.10 thou rms).
• Thinner walls can be cast as compared to sand and permanent mold casting (approximately 0.75 mm or 0.030 in).
• Inserts can be cast-in (such as threaded inserts, heating elements, and high strength Bearing surfaces).
• Reduces or eliminates secondary machining operations.
• Rapid production rates.
• Casting tensile strength as high as 415 megapascals (60 ksi).
• Casting of low fluidity metals.

The main disadvantage to die casting is the very high capital cost. Both the casting equipment required and the dies and related components are very costly, as compared to most other casting processes. Therefore, to make die casting an economic process, a large production volume is needed. Other disadvantages are that the process is limited to high-fluidity metals, and casting weights must be between 30 grams (1 oz) and 10 kg (20 lb).^{[note 3][10]} In the standard die casting process the final casting will have a small amount of porosity. This prevents any heat treating or welding, because the heat causes the gas in the pores to expand, which causes micro-cracks inside the part and exfoliation of the surface.^[4] Thus a related disadvantage of die casting is that it is only for parts in which softness is acceptable. Parts needing hardening (through hardening or case hardening) and tempering are not cast in dies.

Our advantage:

* One-Sotp service(from design to mass production)

* OEM /ODM Customized services

* Rapid prototyping & low-volume production

* High quality & low prices

* Highly skilled manufacturing process.

* Strict quality Control System.
 
Our promise:

* The delivery time and the package can be controled according to the customers' requirement completely.

* we will produce the products seriously according to the drawings, and make sure all the products is suitable for the custoners.

* We will communicate with the customers all the time about the products, we will send the pictures to the customers, so that they can know the Processing process

Our Policy:

Innovation and developing in Technique

High level of expertise

Outstanding quality

On-time delivery to customer needs


SERVICE: